The filter production equipment is used to manufacture the filter element. It can be of different types. According to different types of filter elements, these production equivalents are collectively referred to as filter production equipment, and you want to have a comprehensive understanding of it. It is necessary to have an in-depth understanding, in order to achieve the purpose and achieve the correct use of the filter production equipment.

1. How to choose the right filter production equipment?

Filter production equipment, it has many specific types, or can be said to have different types, and it can be classified according to the type of filter, because different filter elements correspond to different production equipment because of different types of filter production equipment. If you want to choose the right filter production equipment, you need to consider all the relevant factors, and clear which filter element be used to determine which filter production equipment, then to ensure the correct choice.

2. Rotary filter production equipment in filter production equipment

Rotary filter production equipment, which is a specific type of filter production equipment, also it’s a common and common type. Through this filter production equipment, a filter element of PP filter can be obtained to remove suspended solids, particles and Impurities rust and so on.

For the rotary disk filter production equipment structural components, can be upper,lower base,column,turntable assembly,filter push-in assembly, end cover screwing assembly, clamping mechanism and push-out assembly, etc., and its structural features are as follows:

(1) In terms of the number of columns, there are generally four, one end is evenly mounted on the lower frame, and the other end is fixed on the upper frame. The turntable assembly is composed of two parts: a servo motor and a turntable. The servo motor is mounted on the lower base, and the center of the turntable is fixedly connected with the output shaft of the servo motor.

(2) The filter element push-in assembly is fixedly mounted on the upper frame; the end cover screwing assembly comprises three large cylinder fixing frames, a large cylinder and a motor, and the large cylinder fixing frame is fixedly mounted on the upper machine. On the seat, the large cylinder is fixedly mounted on the large cylinder holder, and the motor is fixedly connected to the output end of the large cylinder.

(3) It’s divided into the first and second clamping components for the clamping mechanism in the rotary disk filter production equipment. The first clamping component is fixedly mounted on the lower base, and the second clamping component is fixedly mounted on the upper frame. The assembly is fixedly mounted on the upper frame.www.wxajmsfiltermachinery.com